Monday, May 25, 2015

Photos of stamped concrete

Where is the best place to find photos of stamped concrete?
Try the photo gallery on www.salzanoconcrete.com

Also try galleries on these websites that specialize in decorative concrete:

Concrete Network
http://www.concretenetwork.com

Deco-Crete Supply
www.deco-cretesupply.com

Stampcrete
http://www.stampcrete.com/Photos.aspx

Brickform
www.brickform.com





Salzano Custom Concrete
703-929-9299
www.salzanoconcrete.com

Reseal Stamped concrete

** Maintenance tips for stamped concrete **

Some questions you might have about maintenance for your stamped concrete.


Should I reseal my stamped concrete?

My stamped concrete appears to be fading. Is it fading, or is this something to do with the sealer?

I resealed my stamped concrete with a sealer for masonry that I bought at Home Depot, is that ok?

I decided to reseal my stamped concrete. Just after I finshed, it started raining, is that ok?

How do I know if I should use solvent-based sealer or water-based sealer?

Some articles I read about resealing stamped concrete say it it better to spray it on and some say it is better to roll it on. Which is better?

I resealed my stamped concrete, and not it is slippery when it is wet. Did I do something wrong?

I resealed my stamped concrete, and within a few minutes after I was finished bubbles began to appear. What's going on? Did I do something wrong? Can this be fixed?

=====
Some answers for you about resealing your stamped concrete.

Stamped concrete generally should be resealed each 2-4 years depending on sun exposure and use patterns, etc. Old sealer does not have to be removed first before new sealer is applied.



The best indications that you need new sealer is that when your stamped concrete appears to be faded, chalky,  light color, etc... If you have these symptoms, but your stamped concrete is less than a year old, you may have other problems, ie just a reseal may not solve.

Apply solvent based sealer if your stamped concrete was originally sealed with solvent based sealer and likewise, water based if water bases was used previously. If you mix, you could have unusual chemical reaction.

Many owners of stamped concrete think that color also needs to be added to stamped concrete to get the original look back again. Clear sealer itself will bring the original color back 99% of the time. To test this, just use the clear sealer on a very small area. Most often, just clear sealer application is all that is needed.

Best to do the reseal application in the morning when the temperature is cooler, ie not in direct sunlight on a hot day.

To prep the area, powerwash to clean thoroughly. Keep the power washer nozzle a foot or so away from the concrete so that you don't cause damage to the concrete by the power washer. Dry the concrete completely, ie us a leaf blower to help accellerate the drying process. Again, be sure the stamped concrete is completely dry before applying  new sealer. If you apply sealer before the concrete is dry, the moisture can get trapped into the sealer and create other problems. This is more difficult in colder months since the concrete will take longer to dry.

Be sure to purchase and mix in a grit additive. This is a special material that looks a bit like super fine sugar, that should be mixed into the sealer according to manufacturers instructions. When the sealer is applied and dries, the sealer will have a gritty feel to the that sealer is not slippery when wet.

Follow all manufacturers instructions for sealer, grit and all tools that you are using. Be sure do wear gloves, safety glasses, and breathing protection to stay safe.

Dip your paint roller into the sealer and bring a small "puddle" of sealer onto the concrete. Push the puddle around to be sure the sealer gets into the texture of the concrete, and into the grout lines. Be sure to spread the sealer around to apply a thin coat.



If you apply sealer when the temperature is too hot, or in direct sunlight, the sealer can bubble upon application with the hot concrete, or can get like "cotton candy", ie stringy upon contact with the hot concrete.

If you get bubbles, or if the sealer gets wet before it dries and sealer turns white, hazy, wait until the sealer dries, next day, use xylene to correct most sealer problems. Brush on xylene, or spray on out of a small trigger sprayer. Keep it wet with xylene for at least 3-4 minutes, moving it around with a small brush. This will correct many solvent-base sealer problems.

Some generic articles about resealing stamped concrete

Maintaining and Resealing Stamped Concrete:
http://www.concretedecor.net/decorativeconcretearticles/vol-12-no-3-april-2012/trowel-error-maintaining-and-resealing-stamped-concrete/

How to reseal stamped concrete
https://www.youtube.com/watch?v=4-QNrR8qRWE

How to do reseal maintenance for stamped concrete
https://www.youtube.com/watch?v=tjQExJCQ7D0

D.I.Y. – Re-Sealing Stamped Concrete
http://www.rollandcement.com/diy-resealing-stamped-concrete.php



=====


Hope you found this information helpful.

Salzano Custom Concrete
www.salzanoconcrete.com
703-929-9299

Thursday, May 21, 2015

Concrete Patios website

See our website for lots of photos in our gallery of our stamped concrete patio project.


www.salzanoconcrete.com

Salzano Custom Concrete
703-929-9299

Firepit or Fireplace

Which would you prefer on your patio, a fireplace or a firepit?

What is the difference?

A firepit is essentially a hole in the patio with a small "ring" around the pit with stone facing. The fire in a firepit is "open air" with flames visible. Most firepits are for burning wood logs. A firepit can also be configured to burn natural gas, ie a fire table. (one photo below is such a firepit). Inside the firepit, the base / floor is typically a foot or so below the patio level and the inside area is filled with gravel and stone. Some customers like to put an iron rack inside to hold the burning logs.

On the other hand, a fireplace is a much larger structure where the fire is contained inside. Fireplaces are typically 6-feet to 8-feet high and 4-feet or so across. A fireplace is much larger and will typically be a feature element on the patio, ie a focal point.

As for cost, a fireplace is much more expensive, and can be $6,000 and up. Not uncommon that a large fireplace can be over $10,000.  Whereas, a firepit is a much simpler structure and is typically between $1,000 and $2,000.

Here are photos of each.
Enjoy.






New patio construction in Woodbridge, Virginia

Here are a few photos of a new project, a new stamped concrete patio finished recently in Woodbridge, Virginia.

At Salzano Custom Concrete, we install stamped concrete patios with either our tradition 2-color process or our unique multi-color service.

This particular job is using our traditional 2-color process. This is the patio style of choice for many customers, as this is a traditional stamped concrete style and has a lower price.

This patio is an olive sage color with a Large Random Flagstone stamp pattern.

Hope you enjoy these photos.




Salzano Custom Concrete
www.salzanoconcrete.com
703-929-9299

Some of our partner companies
www.brickform.com

www.deco-cretesupply.com

www.concretenetwork.com